FAQ: What is under the ice in an ice rink?

0 Comments

Insulation Heated Concrete Underneath there is a layer of insulation and a heated concrete layer. This keeps the ground below the ice from freezing, which could expand and ultimately crack the rink structure.

What is underneath an ice rink?

The entire rink sits on a base layer of gravel and sand (G) which has a groundwater drain at the bottom. To defrost the skating surface, the brinewater is heated and pumped through the ice-bearing concrete slab. This heats the under layer of the ice, making it easier to break up and remove with front-end loaders.

How deep is the ice in an ice rink?

Ice is approximately 3/4″ of an inch thick and is usually chilled at 16 degrees fahrenheit. The thicker the ice, the softer and slower it becomes.

How do they freeze the ice in a hockey rink?

At the beginning of the hockey season, the arena uses an advanced refrigeration system that pumps freezing “brinewater” (salt water) through a system of pipes that run through a large piece of concrete known as the “ice slab.” When the “ice slab” gets cold enough, layers of water are applied to it.

How do they fill up ice rinks?

In ice rinks, the refrigerant cools brine water, an anti-freezing agent, which goes through pipes underneath the ice. These steel pipes are typically embedded into a concrete slab and kept at 32 F / 0 C, so that any water placed on top of the slab freezes and becomes the skating surface that we see.

What is a skating rink floor made of?

Skating rinks usually fall into one of the following categories: Wood, concrete, or less commonly, plastic tile (VersaCourt and SkateCourt, for example). Each has its own unique properties, but here at Wheels Skate Center, we’re partial to hardwood skating rink flooring.

How thick should ice rink be?

Q4 – How thick does the ice have to be? A – A minimum of 2” (two inches) thick for the ice to stay solid and hold the weight of a 300lb person is required. For the municipal rinks, we recommend at least 3” (three inches).

How much water is in a hockey rink?

It takes between 12,000 and 15,000 gallons of water to form a hockey rink surface.

How long does it take for an ice rink to freeze?

It freezes almost immediately when it hits the cold floor. Then, more super-thin layers are applied. They are painted white to contrast with the black puck, and lines and logos are also painted on. The entire process can take almost 48 hours.

How much does it cost to keep an ice rink frozen?

Quite allot, nearly 40000 dollars a month to keep the local one going. They have several dehumidifiers, plus about 70 pipes under the ice, all of which is refrigerating.

How much does an ice rink chiller cost?

Our do-it-yourself portable backyard ice rinks for sale start at $26,000 and vary based on size, specifications, and design. The larger kits begin at a price point of $47,000. Whatever your budget, our NiceRink team will work with you to design and deliver the refrigerated ice rink that will best serve your family.

Leave a Reply

Your email address will not be published.

ABOUT ALICE HENNEMAN

My husband and I enjoy eating healthy foods, but they must taste good and be quick to prepare.

My goal with Cook It Quick is: Making you hungry for healthy food!

Follow along as I share recipes and kitchen tricks that help you enjoy the same types of foods. And though I am a registered dietitian and University of Nebraska-Lincoln extension educator, all my recipes must pass inspection by my toughest critic … my husband!

Social Media