What Is The Best Fabric To Cover Kitchen Chairs??


Cotton is a natural upholstery material that is durable and resists fading.

It’s a breathable, absorbent fabric, so it’s best used in a home free of young children; otherwise, water-resistant seat covers can be placed over the children’s chairs to keep the chairs spill- and stain-free.

How much does it cost to reupholster a kitchen chair?

Based on over 1,500 customer responses, the average reupholstery cost is $659 with small chairs and couches costing between $341 and $978. Reupholstering dining room chairs can cost as little as $40 per chair, but a large sofa can cost more than $1,500.

How do I reupholster kitchen chairs?

  • Gather Supplies and Remove Seat Cushion. Select chairs and fabric.
  • Cut Lining. Place seat frame with cushion side face down on lining.
  • Staple Lining to Cushion Frame. Attach lining to frame using staple gun.
  • Trim Lining.
  • Cut Fabric.
  • Staple Fabric to Cushion Frame.
  • Attach Fabric at Corners.
  • Reattach Seat Cushion to Chair Frame.

How do you reupholster a dining chair seat?



Suggested clip · 72 seconds

How to Reupholster a Dining Chair | This Old House – YouTube


Start of suggested clip

End of suggested clip

Is it worth it to reupholster a chair?

Is it worth the effort and cost to reupholster? The truth is that reupholstering furniture can often cost as much as replacing it (and sometimes more). For example, the cost to reupholster a chair cushion may be less than $150, and it’s unlikely you can replace the entire chair for that amount.

What is the best fabric to reupholster dining chairs?

Your fabric choices for reupholstering dining chairs include those natural materials from cotton to leather to cotton blend and linen. The cotton fabric is popular for its durability and likewise its resistance to fading, pilling and wearing. You can have formal or casual cotton used for reupholstering.

How much does it cost to reupholster wingback chair?

The average wingback chair costs about $671 per chair and uses about 7 2/3 yards of fabric.

How do you reupholster a chair corner?

Keep the Corners Neat

  1. Grasp one corner of your cover and pull the point toward the center of the seat cushion. Staple.
  2. Arrange the remaining unstapled corner fabric into small even pleats, pulling tightly. Staple.
  3. Make sure you don’t staple over the screw holes.
  4. Repeat steps 1- 3 for the three remaining corners.

How much fabric do I need to upholster a chair?

An average club chair, for example, requires about 6 1/2 yards of fabric. Keep in mind, however, that this is a guideline, not a rule. Many factors-including the fabric’s pattern, the upholsterer’s work style, and variations in individual pieces of furniture-can influence the yardage.

How do you reupholster a chair with studs?

How to Reupholster a Chair With Studs

  • Pop out old studs with a tack lifter.
  • Place the old studs in a bowl to keep them from getting lost or ending up under someone’s bare feet.
  • Cut the old fabric away from the seat and back of the chair with a utility knife, and check the condition of the foam underneath it.

How do you upholster a chair seat with piping?

How to Upholster a Dining Room Chair Seat With Piping

  1. Measure around the piping on the chair to determine the length of piping you will need.
  2. Fold the fabric at a 90-degree angle.
  3. Wrap the bias strips around the piping cord with the right side of the fabric out.
  4. Unscrew the cushion from the chair.
  5. Place the cushion form top side down on a large sheet of paper.

How much fabric do I need to recover a dining room chair?

All About Fabric!

As a general rule, using 54″ wide fabric, 3/4 yard will work for 2 chairs. Three-quarters yards will give you two pieces that are 27″ x 27″. If you have four chairs, you will need 1.5 yards, six chairs takes 2.25 yards, eight chair seats take 3 yards, and so on.

What is best fabric for dining room chairs?

The Best Kid-Friendly Fabric for Dining Chairs

  • Silk. On the scale of kid-proof to total disaster, silk sits at the lower end.
  • Pure linen. On its own, linen isn’t the best all-weather fabric for dining chairs.
  • Cotton. Again, cotton is a reliable fabric when it is blended with other fabrics.
  • Polyester.
  • Viscose.
  • Vinyl.
  • Leather.

What tools do I need to reupholster a chair?

Upholstery Tools

  1. Needle-Nose Pliers. These are used for pulling out the ends of broken staples.
  2. Rubber Mallet. Every home needs a rubber mallet.
  3. Straight-Blade Sewing Scissors. Best for cutting fabric, thin foam, batting, and thread.
  4. Upholstery Needle. A must have.
  5. Stapler or Tack Hammer.
  6. Claw Tool.
  7. Webbing Stretcher.

How do you upholster a Parsons chair?

How to Upholster a Parsons Chair

  • Measure the width of your Parsons chair seat at the widest part and add 10 inches to get the width of fabric you need for the seat.
  • Measure the height of the seat back from the seat, up and over the back down to the bottom of the chair.
  • Place your upholstery foam on the seat and trim it to fit.

Photo in the article by “Mount Pleasant Granary” http://mountpleasantgranary.net/blog/index.php?m=07&y=14&entry=entry140707-224540


My husband and I enjoy eating healthy foods, but they must taste good and be quick to prepare.

My goal with Cook It Quick is: Making you hungry for healthy food!

Follow along as I share recipes and kitchen tricks that help you enjoy the same types of foods. And though I am a registered dietitian and University of Nebraska-Lincoln extension educator, all my recipes must pass inspection by my toughest critic … my husband!

Social Media